Saving the settings and series commissioning
7.1 Backing up and transferring settings using a memory card
3. In your drive, select "Drive Navigator".
4. Select the "Commissioning" button.
5. Select the button to transfer the settings to the memory card.
6. Select the settings as shown in the diagram and start the data backup.
7. Wait until STARTER signals that the data backup has been completed.
8. Close the screen forms.
You have backed up the settings of the inverter on the memory card.
350
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD