4.5.4
Factory setting of the CU240B-2 interfaces
The factory setting of the terminals depends on which fieldbus the Control Unit supports.
Control Units with PROFIBUS interface
The function of the fieldbus interface and digital inputs DI 0, DI 1 depends on DI 3.
--- No function.
DO 0: p0730
Speed setpoint (main setpoint): p1070[0] = 2050[1]
Figure 4-15
Factory setting of the CU240B-2 DP Control Unit
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
AO 0: p0771[0]
4.5 Installing Control Unit
DI x: r0722.x
Installing
95