Siemens SINAMICS G120 Operating Instructions Manual page 351
Low voltage converters
chassis devices with cu240b-2 and cu240e-2
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Procedure with Startdrive
Proceed as follows to back up the inverter settings to a memory card:
1. Go online.
2. Select "Online & diagnostics".
3. Select "Backing up/reset".
4. Back up the settings to the EEPROM of the inverter.
5. Select the settings as shown in the diagram.
6. Start data transfer
7. Wait until Startdrive has signaled that the data backup has been completed.
You have backed up the inverter settings to a memory card.
Procedure with BOP-2
Proceed as follows to back up your settings on a memory card:
1. Remove any USB cable that is inserted in the inverter.
You have backed up the settings of the inverter on the memory card.
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
7.1 Backing up and transferring settings using a memory card
2. In the "OPTIONS" menu, select "TO CARD".
3. Set the number of your data backup. You can back up 99 different settings
on the memory card.
4. Start data transfer with OK.
5. Wait until the inverter has backed up the settings to the memory card.
Saving the settings and series commissioning
351
Advertisement
Table of Contents
