Selecting The Technological Unit Of The Technology Controller; Setting The Motor Standard, System Of Units And Technology Unit Using Starter - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage converters
chassis devices with cu240b-2 and cu240e-2
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
6.13.3
Selecting the technological unit of the technology controller
Options when selecting the technological unit
p0595 defines in which technological unit the input and output variables of the technology
controller are calculated, e.g. [bar], [m³/min] or [kg/h]. More information on this topic is provided
in the List Manual.
Reference variable
p0596 defines the reference variable of the technological unit for the technology controller.
Unit group
Parameters involved with p0595 belong to unit group 9_1.
More information on this topic is provided in the List Manual.
Special features
You must optimize the technology controller after changing p0595 or p0596.
6.13.4
Setting the motor standard, system of units and technology unit using STARTER
Precondition
STARTER must be in the offline mode to switch over the units.
Select the online mode or the offline mode us‐
ing the adjacent buttons.
STARTER indicates whether you change the settings online in the converter or offline in the
PC:
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
Overview of the manuals (Page 504)
/
.
Advanced commissioning
6.13 Selecting physical units
229
Advertisement
Table of Contents
