Advanced commissioning
6.14 Safe Torque Off (STO) safety function
Procedure with Startdrive
Proceed as follows to configure the safety functions:
1. Select "Select safety functionality".
2. Enable the safety functions.
3. Controlling the safety functions.
4. Define the interface for controlling the safety functions.
You have configured the safety functions
Parameter
p0010 = 95 Drive commissioning parameter filter
p9601
p9761
p9762
p9763
236
Description
Safety Integrated commissioning
Enable functions integrated in the drive (factory setting: 0000 bin)
0 hex
None of the safety functions has been released
1 hex
Basic functions via onboard terminals has been enabled
Enter a password (factory setting: 0000 hex)
Permissible passwords lie in the range 1 ... FFFF FFFF.
New password
Password confirmation
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD