Changing Indexed Parameters - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage converters chassis devices with cu240b-2 and cu240e-2

Hide thumbs Also See for SINAMICS G120:

Table of Contents

A.2 Handling the BOP 2 operator panel

Changing indexed parameters

For indexed parameters, several parameter values are assigned to a parameter number. Each

of the parameter values has its own index.

To change an indexed parameter, proceed as follows:

1. Select the parameter number.

2. Press the OK key.

3. Set the parameter index.

4. Press the OK key.

5. Set the parameter value for the selected index.

You have now changed an indexed parameter.

Converter with the CU240B-2 and CU240E-2 Control Units

Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD