Changes In The Current Manual - Siemens SINAMICS G120 Operating Instructions Manual

Changes in the current manual

Notable changes since the 01/2016 edition of the manual
New hardware
● New PM240P‑2 Power Modules, FSD ... FSF
● New version of the PM230 Power Modules, FSA ... FSC, with article numbers
6SL32 . . ‑ . . . . ‑ . . G .
Hardware that is no longer described in the manual
The following Power Modules are no longer described in the current edition of the manual:
● PM240 Power Module
● PM340 Power Module
● PM260 Power Module
Additional information is provided on the Internet:
PM240 Power Modules mounting instructions
en/view/109738501)
Installation Guide for the PM260 Power Module
en/view/79109730)
Corrections
● The 1PH8 induction motor may no longer be operated with the PM230 Power Module.
The encoderless permanently-excited SIMOTICS S 1FK7 synchronous motor and the
SIMOTICS 1FG1 may by operated on the inverter only on request.
● We recommend that you also activate the friction characteristic when you use the "moment
of inertia estimator" function.
An appropriate note has been added to the description of the "moment of inertia estimator"
function.
● After selecting the "Standard Drive Control" application class, the inverter activates the slip
compensation.
An appropriate note has been added to the description of the "U/f control" function.
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD
Power Module (Page 33)
Detailed technical data, PM230 (Page 461)
Motors and multi-motor drives that can be operated (Page 49)
Moment of inertia estimator (Page 293)
V/f control (Page 276)
(https://support.industry.siemens.com/cs/ww/
(https://support.industry.siemens.com/cs/ww/
5