Siemens SINAMICS G120 Operating Instructions Manual page 230

Low voltage converters chassis devices with cu240b-2 and cu240e-2

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Advanced commissioning

6.13 Selecting physical units

Proceed as follows to select the motor standard and system of units using STARTER:

1. Select in the "Configuration" project tree.

2. Select under the "Units" tab.

3. Select the system of units.

4. Select the technological unit of the technology controller.

5. Select the motor standard.

6. Save your settings.

7. Go online.

The inverter signals that offline, other units and process variables are set than in the inverter

8. Accept these settings in the inverter.

You have selected the motor standard and system of units using STARTER.

Converter with the CU240B-2 and CU240E-2 Control Units

Operating Instructions, 01/2017, FW V4.7 SP6, A5E34259001B AD