Display Ip Netstream Export - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Field
DstMAC(VLAN)
TopLblType(IP/Mask)
Lbl-Exp-S-List
TCPFlag:
DstMask:
NextHop:
DstAS:
BGPNextHop:
OutVRF:
SamplerMode:
Active: Bytes/Pkt:

display ip netstream export

Use display ip netstream export to display information about the NetStream data export.
Syntax
display ip netstream export
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
IP NetStream export information varies by aggregation mode. This command displays IP NetStream
export information for all the configured aggregation modes.
Examples
# Display information about the NetStream data export.
<Sysname> display ip netstream export
SrcMAC(VLAN)
SrcMask:
SrcAS:
InVRF:
SamplerInt:
Description
•
The highest 8 bits represent the type field.
•
The lowest 8 bits represent the code field.
The value for the source port is set to 0 and does not indicate any
statistics.
Layer 2 information of the active flows in the current cache:
•
Destination MAC address.
•
Destination VLAN ID.
•
Source MAC address.
•
Source VLAN ID.
These fields are not supported in current release.
Other information about the active flows in the cache:
•
TCP tag.
•
Destination mask.
•
Source mask.
•
Routing next hop.
•
Destination AS.
•
Source AS.
•
BGP next hop.
•
VPN to which the outbound packets belong.
•
VPN to which the inbound packets belong.
•
Sampling mode. This field is not supported in current release.
•
Sampling interval. This field is not supported in current release.
•
Flow's active time.
•
Number of bytes per packet.
317