Display Snmp-Agent Group - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
context-name: Specifies an SNMP context by its name, a case-sensitive string of 1 to 32 characters.
If no SNMP context is specified, this command displays all SNMP contexts created on the device.
Examples
# Display all SNMP contexts created on the device.
<Sysname> display snmp-agent context
ospfcontext
isiscontext
Related commands
snmp-agent context
display snmp-agent group
Use display snmp-agent group to display SNMP group information, including the group name,
security model, MIB view, and storage-type.
Syntax
display snmp-agent group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
group-name: Specifies an SNMPv1, SNMPv2c, or SNMPv3 group name for high encryption in
non-FIPS mode, and an SNMPv3 group name for high encryption in FIPS mode. It is a
case-sensitive string of 1 to 32 characters. If no group is specified, this command displays
information about all SNMP groups.
Examples
# Display information about all SNMP groups.
<Sysname> display snmp-agent group
Group name: groupv3
Security model: v3 noAuthnoPriv
Readview: ViewDefault
Writeview: <no specified>
Notifyview: <no specified>
Storage-type: nonVolatile
158
Advertisement
Table of Contents
