HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 35

Field
One way results
Max SD delay
Max DS delay
Min SD delay
Min DS delay
Number of SD delay
Number of DS delay
Sum of SD delay
Sum of DS delay
Square-Sum of SD delay
Square-Sum of DS delay
SD lost packets
DS lost packets
Lost packets for unknown reason
Voice scores
MOS value
ICPIF value
Hop IP
Path-jitter results
Jitter number
Min/Max/Average jitter
Positive jitter number
Min/Max/Average positive jitter
Sum/Square-Sum positive jitter
Negative jitter number
Min/Max/Average negative jitter
Description
Unidirectional delay.
This field is available only for the UDP jitter and voice operations.
Maximum delay from source to destination.
Maximum delay from destination to source.
Minimum delay from source to destination.
Minimum delay from destination to source.
Number of delays from source to destination.
Number of delays from destination to source.
Sum of delays from source to destination.
Sum of delays from destination to source.
Square sum of delays from source to destination.
Square sum of delays from destination to source.
Number of lost packets from the source to the destination.
Number of lost packets from the destination to the source.
Number of lost packets for unknown reasons.
Voice parameters.
This field is available only for the voice operation.
MOS value calculated for the voice operation.
ICPIF value calculated for the voice operation.
IP address of the hop.
This field is available only for the path jitter operation.
Path jitter operation results.
This field is available only for the path jitter operation.
Number of jitters.
This field is available only for the path jitter operation.
Minimum/maximum/average jitter in milliseconds.
This field is available only for the path jitter operation.
Number of positive jitter.
This field is available only for the path jitter operation.
Minimum/maximum/average positive jitter in milliseconds.
This field is available only for the path jitter operation.
Sum/square sum of the positive jitter.
This field is available only for the path jitter operation.
Number of negative jitter.
This field is available only for the path jitter operation.
Minimum/maximum/average negative jitter in milliseconds.
This field is available only for the path jitter operation.
26