HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 104

Stability: 0.000 pps
Clock precision: 2^-10
Root delay: 0.00000 ms
Root dispersion: 3.96367 ms
Reference time: d0c5fc32.92c70b1e
# Display the NTP service status when time is not synchronized.
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Clock jitter: 0.000000 s
Stability: 0.000 pps
Clock precision: 2^-10
Root delay: 0.00000 ms
Root dispersion: 0.00002 ms
Reference time: d0c5fc32.92c70b1e
Table 17 Command output
Field
Clock status
Clock stratum
System peer
Local mode
Reference clock ID
Wed, Dec 29 2010 18:28:02.573
Wed, Dec 29 2010 18:28:02.573
Description
Status of the system clock:
•
synchronized—The system clock has been
synchronized.
•
unsynchronized—The system clock has not been
synchronized.
Stratum level of the system clock.
IP address of the selected NTP server.
Operation mode of the local device:
•
unspec—The mode is unspecified.
•
active—Active mode.
•
passive—Passive mode.
•
client—Client mode.
•
server—Server mode.
•
broadcast—Broadcast or multicast server mode.
•
bclient—Broadcast or multicast client mode.
For an IPv4 NTP server:
The field represents the IP address of the remote server when
the local device is synchronized to a remote NTP server.
The field represents the local clock when the local device uses
the local clock as a reference source.
•
When the local clock has a stratum level of 1, this field
displays Local.
•
When the local clock has any other stratum, this field
displays the IP address of the local clock.
For an IPv6 NTP server:
The field represents the MD5 digest of the first 32 bits of the
IPv6 address of the remote server when the local device is
synchronized to a remote IPv6 NTP server.
The field represents the local clock when the local device uses
the local clock as a reference source.
•
When the local clock has a stratum level of 1, this field
95