Display Rtm Policy - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

display rtm policy

Use display rtm policy to display monitor policies.
Syntax
display rtm policy { active | registered [ verbose ] } [ policy-name ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
active: Displays policies that are running.
registered: Displays policies that have been created.
policy-name: Specifies a policy by its name. If you do not specify a policy, the command displays all
monitor policies that are running or have been created.
verbose: Displays detailed information about monitor policies.
Examples
# Display all running monitor policies.
<Sysname> display rtm policy active
JID Type
501 CLI
505 TCL
# Display all monitor policies that have been created.
<Sysname> display rtm policy registered
Total number: 2
Type Event
CLI CLI
TCL CLI
# Display detailed information about all monitor policies.
<Sysname> display rtm policy registered verbose
Total number: 2
Policy Name: test1
Policy Type: CLI
Event Type: CLI
TimeRegistered: Jan 07 11:08:18 2015
User-role: network-operator
Policy Name: test2
Policy Type: TCL
Event Type: CLI
TimeRegistered: Jan 07 11:07:59 2015
User-role: network-admin
Event TimeActive
CLI Jan 07 11:16:57 2015 test1
CLI Jan 07 11:16:57 2015 test2
TimeRegistered
Jan 07 11:08:18 2015 test1
Jan 07 11:07:59 2015 test2
network-admin
PolicyName
PolicyName
235