Display Diagnostic Result - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Examples
# Display the number of executions and the number of failed tests configured for on-demand
diagnostic tests.
<Sysname> display diagnostic ondemand configuration
Maximum test-repeating times: 4
Maximum test-failure times: 1
# Display the number of executions configured for on-demand diagnostic tests.
<Sysname> display diagnostic ondemand configuration
Maximum test-repeating times: 4
Maximum test-failure times: Not configured
Related commands
diagnostic ondemand failure
diagnostic ondemand repeating
display diagnostic result
Use display diagnostic result to display test results.
Syntax
In standalone mode:
display diagnostic result [ slot slot-number [ test test-name ] ] [ verbose ]
In IRF mode:
display diagnostic result [ chassis chassis-number [ slot slot-number [ test test-name ] ] ]
[ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
applies to all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify an IRF member device or
virtual chassis, the command applies to all member devices. If you do not specify a card, the
command applies to all cards of the specified member device. (In IRF mode.)
test test-name: Specifies a test by its name, a case-insensitive string of 1 to 31 characters. If you do
not specify this option, the command applies to all diagnostic tests on the specified card.
verbose: Displays detailed test results for diagnostic tests that are enabled or executed. (Statistics
are not included.) If you do not specify this parameter, the command displays brief test results for the
diagnostic tests.
Examples
# (In standalone mode.) Display brief test results for all diagnostic tests on card 1.
<Sysname> display diagnostic result slot 1
402
Advertisement
Table of Contents
