Ip Netstream Export Version - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Syntax
ip netstream export v9-template refresh-rate time minutes
undo ip netstream export v9-template refresh-rate time
Default
Version 9 templates are sent every 30 minutes.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Specifies the refresh interval in the range of 1 to 3600 minutes.
Usage guidelines
A NetStream server uses version 9 templates to parse the data from the NetStream device, but the
server does not permanently save version 9 templates.
For a NetStream server to use correct version 9 templates, configure the refresh frequency or
refresh interval for version 9 templates. If both settings are configured, templates are sent when
either of the conditions is reached.
To configure the refresh frequency for version 9 templates, use the ip netstream export
v9-template refresh-rate packet command.
Examples
# Configure the device to send version 9 templates every 60 minutes.
<Sysname> system-view
[Sysname] ip netstream export v9-template refresh-rate time 60
Related commands
ip netstream export v9-template refresh-rate packet

ip netstream export version

Use ip netstream export version 5 to export NetStream data in the version 5 format and choose
whether or not to record AS information.
Use ip netstream export version 9 to export NetStream data in the version 9 format and choose
whether to record AS and BGP next hop information.
Use undo ip netstream export version to restore the default.
Syntax
ip netstream export version 5 [ origin-as | peer-as ]
ip netstream export version 9 [ origin-as | peer-as ] [ bgp-nexthop ]
undo ip netstream export version
Default
NetStream traditional data export uses the version 9 format. The peer AS numbers are exported.
The BGP next hop is not exported.
329