HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 391

Destination
Monitor
terminal
Log host
Log buffer
Log file
Security log
file
Diagnostic
log file
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
module-name: Specifies a module by its name. For instance, to output FTP information, set this
argument to FTP. You can use the info-center source ? command to view the modules supported
by the device.
default: Specifies all modules, which can be displayed by using the info-center source ?
command.
console: Outputs logs to the console.
logbuffer: Outputs logs to the log buffer.
logfile: Outputs logs to the log file.
loghost: Outputs logs to the log host.
monitor: Outputs logs to the monitor terminal.
deny: Disables log output.
level severity: Specifies a severity level in the range of 0 to 7. The smaller the severity value, the
higher the severity level. See
higher levels are allowed or denied to be output.
Usage guidelines
If you do not set an output rule for a module, the module uses the default output rule or the output
rule set by using the default keyword.
If you use the command multiple times, only the most recent output rule takes effect for the specified
module.
Source Common
modules log
modules
All supported
debugging
modules
All supported
informational
modules
All supported
informational
modules
All supported
informational
modules
All supported
modules,
Disabled
cannot be
filtered
All supported
modules,
Disabled
cannot be
filtered
Table 82
Security log
Disabled
Disabled
Disabled
Disabled
Debugging, which
cannot be filtered
Disabled
for more information. Logs at the specified severity level and
382
Diagnostic
Hidden log
log
Disabled Disabled
Disabled informational
Disabled informational
Disabled informational
Disabled Disabled
Debugging,
which cannot be Disabled
filtered