HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 248
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Parameters
interface-type interface-number: Specifies an interface by its type and number.
monitor-obj monitor-obj: Specifies the traffic statistic to be monitored on the interface. For keywords
available for the monitor-obj argument, see
start-op start-op: Specifies the operator for comparing the monitored traffic statistic with the start
threshold. The start threshold is crossed if the comparison result meets the condition. For keywords
available for the start-op argument, see
start-val start-val: Specifies the start threshold to be compared with the monitored traffic statistic.
The value range is 0 to 4294967295.
restart-op restart-op: Specifies the operator for comparing the monitored traffic statistic with the
restart threshold. The restart threshold is crossed if the comparison result meets the condition. For
keywords available for the restart-op argument, see
restart-val restart-val: Specifies the restart threshold to be compared with the monitored traffic
statistic. The value range is 0 to 4294967295.
interval interval: Specifies the interval to sample the monitored traffic statistic for a comparison. The
value range is 1 to 4294967295 seconds. The default is 300 seconds.
Table 55 Monitored objects
Monitored traffic statistic
input-drops
input-errors
output-drops
output-errors
rcv-bps
rcv-broadcasts
rcv-pps
tx-bps
tx-pps
Table 56 Comparison operators
Comparison operator
eq
ge
gt
le
lt
ne
Usage guidelines
Use interface event monitor policies to monitor traffic statistics on an interface.
You can configure only one event for a monitor policy. If the monitor policy already contains an event,
the new event replaces the old event.
Table
55.
Table
56.
Table
Description
Number of discarded incoming packets.
Number of incoming error packets.
Number of discarded outgoing packets.
Number of outgoing error packets.
Receive rate, in bps.
Number of incoming broadcasts.
Receive rate, in packets per second.
Transmit rate, in bps.
Transmit rate, in packets per second.
Description
Equal to.
Greater than or equal to.
Greater than.
Less than or equal to.
Less than.
Not equal to.
239
56.
Advertisement
Table of Contents
