Display Poe-Power - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

GE1/0/30
--- On State Ports: 3; Used: 23.8(W);
Table 28 Command output
Field
Interface
Current
Peak
Max
PD Description
Ports On
Used
Remaining

display poe-power

Use display poe-power to display PoE power information.
Syntax
In standalone mode:
display poe-power
In IRF mode:
display poe-power [ chassis chassis-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
chassis chassis-number: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command displays information about all PoE power supplies and PSEs in the
IRF fabric. (In IRF mode.)
Usage guidelines
This command is only available for the default MDC. For more information about MDCs, see Virtual
Technologies Configuration Guide.
Examples
# (In standalone mode.) Display PoE power information.
<Sysname> display poe-power
PoE Current Power
PoE Average Power
0.0 0.0
Description
Interface name of a PI.
Current power of a PI.
Peak power of a PI.
Maximum power of a PI.
Type and location description for the PD connected with a PI.
Number of PIs that are supplying power.
Power consumed by all PIs.
Remaining power on the PSE.
5.0 IP Phone on Room 809 for Alien
Remaining: 776.2(W) ---
: 1870 W
: 2100 W
139