HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 200

snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string [ v1 | v2c
| v3 [ authentication | privacy ] ]
undo snmp-agent target-host { trap | inform } address udp-domain { ip-address | ipv6
ipv6-address } params securityname security-string [ vpn-instance vpn-instance-name ]
High encryption in FIPS mode:
snmp-agent target-host inform address udp-domain { ip-address | ipv6 ipv6-address }
[ udp-port port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string
v3 { authentication | privacy }
snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
{ authentication | privacy }
undo snmp-agent target-host { trap | inform } address udp-domain { ip-address | ipv6
ipv6-address } params securityname security-string [ vpn-instance vpn-instance-name ]
Default
No SNMP notification target host has been configured.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
inform: Sends notifications as informs.
trap: Sends notifications as traps.
address: Specifies the destination address of SNMP notifications.
udp-domain: Specifies UDP as the transport protocol.
ip-address: Specifies the IPv4 address or host name of the target host as the destination of SNMP
notifications. The host name is a case-insensitive string of 1 to 253 characters. The string can only
contain letters, numbers, hyphens (-), underscores (_), and dots (.). If you specify a host name, the
IPv4 address of the target host can be obtained.
ipv6 ipv6-address: Specifies the IPv6 address or host name of the target host as the destination of
SNMP notifications. The host name is a case-insensitive string of 1 to 253 characters, which only
contains letters, numbers, hyphens (-), underscores (_), and dots (.). If you specify a host name, the
IPv6 address of the target host can be obtained.
udp-port port-number: Specifies the UDP port for SNMP notifications. If no UDP port is specified,
UDP port 162 is used.
vpn-instance vpn-instance-name: Specifies the VPN for the target host. The vpn-instance-name
argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters. If
this parameter is not specified, the target host is in the public network.
params securityname security-string: Specifies the authentication parameter. The security-string
argument specifies an SNMPv1 or SNMPv2c community name or an SNMPv3 username, a string of
1 to 32 characters.
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
191