Mirroring-Group - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Remote probe VLAN: 1901
Table 73 Command output
Field
Mirroring group
Type
Status
Mirroring port
Mirroring CPU
Monitor port
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to delete mirroring groups.
Syntax
mirroring-group group-id { local | remote-destination | remote-source }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
Default
No mirroring group exists on a switch.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 4.
local: Specifies local mirroring groups.
remote-destination: Specifies remote destination groups.
remote-source: Specifies remote source groups.
all: Specifies all mirroring groups.
Examples
# Create local mirroring group 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
Description
Number of the mirroring group.
Type of the mirroring group:
•
Local.
•
Remote source.
•
Remote destination.
Status of the mirroring group:
•
Active—The mirroring group has taken effect.
•
Incomplete—The mirroring group configuration is not complete and
does not take effect.
Source port.
Source CPU.
Destination port.
303
Advertisement
Table of Contents
