Snmp-Agent; Snmp-Agent Calculate-Password - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
snmp-agent
Use snmp-agent to enable the SNMP agent.
Use undo snmp-agent to disable the SNMP agent.
Syntax
snmp-agent
undo snmp-agent
Default
SNMP agent is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The snmp-agent command is optional for an SNMP configuration task. The SNMP agent is
automatically enabled when you execute any command that begins with snmp-agent except for the
snmp-agent calculate-password command.
Examples
# Enable the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent
snmp-agent calculate-password
Use snmp-agent calculate-password to calculate a digest for the ciphertext authentication or
privacy key converted from a plaintext key in SNMPv3.
Syntax
High encryption in non-FIPS mode:
snmp-agent calculate-password plain-password mode { 3desmd5 | 3dessha | md5 | sha }
{ local-engineid | specified-engineid engineid }
High encryption in FIPS mode:
snmp-agent
specified-engineid engineid }
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
plain-password: Specifies a plaintext authentication or privacy key.
calculate-password
plain-password
mode
175
sha
{
local-engineid
|
Advertisement
Table of Contents
