Snmp-Agent Port; Snmp-Agent Remote - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

[Sysname] snmp-agent packet max-size 1024

snmp-agent port

Use snmp-agent port to specify the UDP port for receiving SNMP packets.
Use undo snmp-agent port to restore the default.
Syntax
snmp-agent port port-num
undo snmp-agent port
Default
The device uses UDP port 161 for receiving SNMP packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
port-num: Specifies the UDP port for receiving SNMP packets, in the range of 1 to 65535. The default
is 161.
Usage guidelines
After changing the port number for receiving SNMP packets, reconnect the device by using the port
number for SNMP get and set operations.
To display UDP port information, use the display current-configuration command.
Examples
# Specify the UDP port for receiving SNMP packets as 5555.
<Sysname> system-view
[Sysname] snmp-agent port 5555
# Restore the default UDP port.
<Sysname> system-view
[Sysname] undo snmp-agent port

snmp-agent remote

Use snmp-agent remote to configure the SNMP engine ID of a remote SNMP entity.
Use undo snmp-agent remote to delete a remote SNMP engine ID.
Syntax
snmp-agent remote { ip-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
engineid engineid
undo snmp-agent remote ip-address
Default
No remote SNMP engine ID has been configured.
186