Info-Center Synchronous - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

After you set an output rule for a module, you must use the module-name argument to modify or
remove the rule. A new output rule configured by using the default keyword does not take effect on
the module.
Examples
# Output only VLAN module's information with a minimum severity level of emergency to the
console.
<Sysname> system-view
[Sysname] info-center source default console deny
[Sysname] info-center source vlan console level emergency
# Based on the previous configuration, disable output of VLAN module's information to the console
so no system information is output to the console.
<Sysname> system-view
[Sysname] undo info-center source vlan console

info-center synchronous

Use info-center synchronous to enable synchronous information output.
Use undo info-center synchronous to disable synchronous information output.
Syntax
info-center synchronous
undo info-center synchronous
Default
Synchronous information output is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
System log output interrupts ongoing configuration operations, including obscuring previously
entered commands. Synchronous information output shows the obscured commands. It also
provides a command prompt in command editing mode, or a [Y/N] string in interaction mode so you
can continue your operation from where you were stopped.
Examples
# Enable synchronous information output, and then issue the display current-configuration
command to view the current configuration of the device.
<Sysname> system-view
[Sysname] info-center synchronous
Info-center synchronous output is on
[Sysname] display current-
At this time, the system receives log information. It displays the log information first, and then
displays your previous input, which is display current- in this example.
%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Sysname] display current-
383