Snmp-Agent Community - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

mode: Specifies the same authentication mode and privacy mode as configured in the snmp-agent
usm-user v3 command. The encryption algorithms AES, 3DES, and DES are in descending order of
security strength. DES is enough to meet general security requirements. The MD5 authentication
algorithm is faster than SHA-1, while SHA-1 provides higher security than MD5.
•
3desmd5: Converts the plaintext privacy key to an encrypted key for 3DES encryption used in
conjunction with MD5 authentication.
•
3dessha: Converts the plaintext privacy key to an encrypted key for 3DES encryption used in
conjunction with SHA-1 authentication.
•
md5: Converts the plaintext authentication key to a ciphertext key for MD5 authentication, or
converts the plaintext privacy key to a ciphertext key for AES or DES encryption used in
conjunction with MD5.
•
sha: Converts the plaintext authentication key to a ciphertext key for SHA-1 authentication, or
converts the plaintext privacy key to a ciphertext key for AES or DES encryption used in
conjunction with SHA-1 authentication.
local-engineid: Uses the local engine ID to calculate the ciphertext key. You can configure the local
engine ID by using the snmp-agent local-engineid command.
specified-engineid engineid: Uses a user-defined engine ID to calculate the ciphertext key. The
engineid argument specifies an SNMP engine ID as a hexadecimal string. It must contain an even
number of hexadecimal characters, in the range of 10 to 64. All-zero and all-F strings are invalid.
Usage guidelines
Make sure the SNMP agent is enabled before you execute the snmp-agent calculate-password
command.
For security purposes, use this command to calculate digests for ciphertext authentication and
privacy keys when you create SNMPv3 users by using the snmp-agent usm-user v3 command.
The converted key is valid only under the engine ID specified for key conversion.
Examples
# Use the local engine and the SHA-1 algorithm to calculate a digest for the ciphertext key converted
from the plaintext key authkey.
<Sysname> system-view
[Sysname] snmp-agent calculate-password authkey mode sha local-engineid
The encrypted key is: 09659EC5A9AE91BA189E5845E1DDE0CC
Related commands
snmp-agent local-engineid
snmp-agent usm-user v3

snmp-agent community

Use snmp-agent community to configure an SNMP community.
Use undo snmp-agent community to delete an SNMP community.
Syntax
In VACM mode:
snmp-agent community { read | write } [ simple | cipher ] community-name [ mib-view
view-name ] [ acl acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent community { read | write } [ cipher ] community-name
In RBAC mode:
176