Info-Center Enable - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Syntax
info-center logfile overwrite-protection [ all-port-powerdown ]
undo info-center logfile overwrite-protection
Default
Log file overwrite-protection is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
all-port-powerdown: Shuts down all the service ports on the device when the log file is full or the
storage media runs out of space.
Usage guidelines
This command is supported only in FIPS mode.
Examples
# Enable log file overwrite-protection.
<Sysname> system-view
[Sysname] info-center logfile overwrite-protection

info-center enable

Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Information center is enabled.
369