Enable - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Table 79 Command output
Field
Flow template refresh frequency
Flow template refresh interval
Active flow templates
Created flow templates
Protocol-port outbound template
Protocol-port inbound template
Field count
Field type
Field length (bytes)
Flows
Out packets
In packets
Out bytes
In bytes
First forwarded
Last forwarded
Sampling algorithm
PAD
Sampling interval

enable

Use enable to enable an IPv6 NetStream aggregation mode.
Use undo enable to disable an IPv6 NetStream aggregation mode.
Syntax
enable
undo enable
Default
No IPv6 NetStream aggregation mode is enabled.
Views
IPv6 NetStream aggregation mode view
Predefined user roles
network-admin
Description
Refresh frequency at which the templates are sent, in
packets.
Refresh interval at which the templates are sent, in
minutes.
Number of active IPv6 NetStream templates.
Number of templates that have been created.
Information about the protocol-port template in the
outbound direction.
Information about the protocol-port template in the
inbound direction.
Total number of fields in the template.
Type of a field in the template.
Length of the field, in bytes.
Number of flows.
Number of sent packets.
Number of received packets.
Number of sent bytes.
Number of received bytes.
System time when the first packet was forwarded,
accurate to milliseconds.
System time when the last packet was forwarded,
accurate to milliseconds.
This field is not supported in current release.
Padding string.
This field is not supported in current release.
339