Mirroring-Group Mirroring-Cpu - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

mirroring-group mirroring-cpu

Use mirroring-group mirroring-cpu to configure source CPUs for a mirroring group.
Use undo mirroring-group mirroring-cpu to remove source CPUs from a mirroring group.
Syntax
In standalone mode:
mirroring-group group-id mirroring-cpu slot slot-number-list { both | inbound | outbound }
undo mirroring-group group-id mirroring-cpu slot slot-number-list
In IRF mode:
mirroring-group group-id mirroring-cpu chassis chassis-number slot slot-number-list { both |
inbound | outbound }
undo mirroring-group group-id mirroring-cpu chassis chassis-number slot slot-number-list
Default
No source CPU is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 4. The specified mirroring
group must already exist.
slot slot-number-list: Specifies the cards that hold the source CPUs. The slot-number-list argument
specifies a space-separated list of up to eight card items. Each item specifies a card by its slot
number or a range of cards in the format of start-slot-number to end-slot-number. The value for the
end-slot-number argument must be equal to or greater than the value for the start-slot-number
argument. (In standalone mode.)
chassis chassis-number slot slot-number-list: Specifies the cards that hold the source CPUs on the
specified IRF member device. The chassis-number argument specifies the IRF member device ID.
The slot-number-list argument specifies a space-separated list of up to eight card items. Each item
specifies a card by its slot number or a range of cards in the format of start-slot-number to
end-slot-number. The value for the end-slot-number argument must be equal to or greater than the
value for the start-slot-number argument. (In IRF mode.)
both: Mirrors both received and sent packets.
inbound: Mirrors only received packets.
outbound: Mirrors only sent packets.
Usage guidelines
You can configure source CPUs only for local mirroring groups and remote source groups.
CPUs on the following MPUs cannot be configured as source CPUs:
•
LSQM1SRP8X2QE0(JH209A, JH217A).
•
LSQM2MPUD0(JH207A, JH216A).
•
LSQM3MPUA0(JH208A).
304