Display Kernel Reboot - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

display kernel reboot

Use display kernel reboot to display kernel thread reboot information.
Syntax
In standalone mode:
display kernel reboot show-number [ offset ] [ verbose ] [ slot slot-number [ cpu cpu-number ] ]
In IRF mode:
display kernel reboot show-number [ offset ] [ verbose ] [ chassis chassis-number slot
slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
show-number: Specifies the number of kernel thread reboots to display, in the range of 1 to 20.
offset: Specifies the offset between the starting reboot and the latest reboot, in the range of 0 to 19.
The default value is 0.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
brief information.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the
command displays kernel thread reboot information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the command displays kernel thread reboot information for the global active
MPU. (In IRF mode.)
cpu cpu-number: Specifies a CPU by its number.
Examples
# Display brief information about the latest kernel thread reboot.
<Sysname> display kernel reboot 1
----------------- Reboot record 1 -----------------
Recorded at
Occurred at
Reason
Thread
Context
Chassis
Target Chassis
Slot
Target Slot
Cpu
VCPU ID
Kernel module info
# Display detailed information about the latest kernel thread reboot.
: 2013-05-01 11:16:00.823018
: 2013-05-01 11:16:00.823018
: 0x31
: comsh (TID: 16306)
: thread context
: 1
: 1
: 1
: 3
: 0
: 9
: module name (system) module address (0xffffffffc0054000)
module name (addon) module address (0xffffffffc0002000)
264