Ip Netstream Timeout Active - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
origin-as: Exports statistics of the source AS originating the route for the source address and the
destination AS for the destination address.
peer-as: Exports statistics of the peer ASs for the source and destination address.
bgp-nexthop: Exports statistics of BGP next hops.
Usage guidelines
A NetStream entry for a flow records the source IP address and destination IP address, and two AS
numbers for each IP address. You can choose to configure which AS numbers are to be exported as
the source AS and destination AS.
If the version 5 format is configured to export NetStream data, the NetStream aggregation data
export uses the version 8 format.
If the version 9 format is configured to export NetStream data, the NetStream aggregation data
export uses the version 9 format.
Statistics of BGP next hop can be exported only in the version 9 format.
If you execute the command multiple times, the most recent configuration takes effect.
Examples
# Configure the device to export NetStream data in the version 5 format and to specify the
NetStream data to include the source AS and destination AS.
<Sysname> system-view
[Sysname] ip netstream export version 5 origin-as

ip netstream timeout active

Use ip netstream timeout active to set the aging timer for active flows.
Use undo ip netstream timeout active to restore the default.
Syntax
ip netstream timeout active minutes
undo ip netstream timeout active
Default
The aging timer is five minutes for active flows.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
minutes: Sets the aging timer for active flows, in the range of 1 to 5 minutes.
330