Ip Netstream Export Host - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Use undo ip netstream aggregation advanced to restore the default.
Syntax
ip netstream aggregation advanced
undo ip netstream aggregation advanced
Default
NetStream hardware aggregation is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
The hardware aggregation does not take effect in the following situations:
•
The destination host is configured for the NetStream traditional data export in system view.
•
The aggregation mode set by the ip netstream aggregation command is not supported by
NetStream hardware aggregation.
The NetStream hardware aggregation entries are stored in the same cache as NetStream traditional
data entries and are exportable.
Examples
# Enable NetStream hardware aggregation.
<Sysname> system-view
[Sysname] ip netstream aggregation advanced
Related commands
ip netstream aggregation

ip netstream export host

ip netstream export host
Use ip netstream export host to specify a destination host for NetStream data export.
Use undo ip netstream export host to remove the specified destination host or all destination hosts
that are configured in the current view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination host is specified.
Views
System view, NetStream aggregation mode view
Predefined user roles
network-admin
mdc-admin
325