Poe Pd-Description; Poe Pd-Policy Priority - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

# Set the PoE power transmission mode to power over signal cables in PoE profile view.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe mode signal
Related commands
poe-profile

poe pd-description

Use poe pd-description to configure a description for the PD that connects to a PI.
Use undo poe pd-description to restore the default.
Syntax
poe pd-description text
undo poe pd-description
Default
No description is available for the PD that connects to a PI.
Views
PI view
Predefined user roles
network-admin
mdc-admin
Parameters
text: Configures a description for the PD connected to the PI, a case-sensitive string of 1 to 80
characters.
Examples
# Configure the description for the PD as IP Phone for Room 101.
<Sysname> system-view
[Sysname] interface gigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] poe pd-description IP Phone For Room 101

poe pd-policy priority

Use poe pd-policy priority to enable PI power management.
Use undo poe pd-policy priority to restore the default.
Syntax
poe pd-policy priority
undo poe pd-policy priority
Default
PI power management is disabled.
Views
System view
148