Port Mirroring Commands; Display Mirroring-Group - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Port mirroring commands

display mirroring-group

Use display mirroring-group to display mirroring group information.
Syntax
display mirroring-group { group-id | all | local | remote-destination | remote-source }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 4.
all: Specifies all mirroring groups.
local: Specifies local mirroring groups.
remote-destination: Specifies remote destination groups.
remote-source: Specifies remote source groups.
Usage guidelines
Mirroring group information includes the type, status, and content of a mirroring group. It is sorted by
mirroring group number.
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1
Monitor port: GigabitEthernet1/0/2
Mirroring group 6:
Type: Remote source
Status: Incomplete
Mirroring port:
GigabitEthernet1/0/4
Remote probe VLAN: 1900
Mirroring group 9:
Type: Remote destination
Status: Active
Monitor port: GigabitEthernet1/0/6
Inbound
Both
302