Display Ipv6 Netstream Template - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Field
Flow source interface
Flow destination VPN instance
Flow destination IP address (UDP)
Version 9 exported flows number
Version 9 exported UDP datagrams number
(failed)

display ipv6 netstream template

Use display ipv6 netstream template to display IPv6 NetStream template information.
Syntax
In standalone mode:
display ipv6 netstream template [ slot slot-number ]
In IRF mode:
display ipv6 netstream template [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, the command
displays IPv6 NetStream template information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, the command displays
IPv6 NetStream template information for the global active MPU. (In IRF mode.)
Usage guidelines
IP NetStream templates vary by aggregation mode. This command displays IP NetStream template
information for all the configured aggregation modes.
Examples
# Display NetStream template information.
<Sysname> display ipv6 netstream template
Flow template refresh frequency
Flow template refresh interval
Active flow templates
Description
Source interface from which the IPv6 NetStream data are
exported.
VPN to which the destination address of the IPv6
NetStream data export belongs.
Destination IP address and UDP port number of the IPv6
NetStream data export.
Number of flows that are exported in the version 9 format.
Number of UDP packets that are sent in the version 9
format. The field in the parentheses indicates the number
of UDP packets that failed to be sent.
: 20
: 30 min
: 4
337