Terminal Monitor - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
This command takes effect only for the current connection between the terminal and the device. If a
new connection is established, the display of logs on the terminal restores the default.
Examples
# Set the lowest level of the logs that can be output on the monitor terminal to 7 (Debugging).
<Sysname> terminal logging level 7
terminal monitor
Use terminal monitor to enable the monitoring of logs on the current terminal.
Use undo terminal monitor to disable the monitoring of logs on the current terminal.
Syntax
terminal monitor
undo terminal monitor
Default
Monitoring of logs is enabled on the console and disabled on the monitor terminal.
Views
User view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command takes effect only for the current connection between the terminal and the device. If a
new connection is established, the default is restored.
Examples
# Enable the monitoring of logs on the current terminal.
<Sysname> terminal monitor
The current terminal is enabled to display logs.
390
Advertisement
Table of Contents
