Snmp-Agent { Inform | Trap } Source - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the IP address of a remote SNMP entity.
ipv6 ipv6-address: Specifies the IPv6 address of a remote SNMP entity.
vpn-instance vpn-instance-name: Specifies the VPN for a remote SNMP entity. The
vpn-instance-name argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to
31 characters. If this option is not specified, the remote SNMP entity is in the public network.
engineid: Specifies the SNMP engine ID of the remote SNMP entity. This argument must be a
hexadecimal string that contains an even number of characters, in the range of 10 to 64. All-zero and
all-F strings are invalid.
Usage guidelines
To send informs to an NMS, you must configure the SNMP engine ID of the NMS on the SNMP
agent.
The NMS accepts the SNMPv3 informs from the SNMP agent only if the engine ID in the informs is
the same as its local engine ID.
You can configure up to 20 remote SNMP engine IDs.
Examples
# Configure the SNMP engine ID (123456789A) of the SNMP manager (10.1.1.1).
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
Related commands
display snmp-agent remote

snmp-agent { inform | trap } source

Use snmp-agent { inform | trap } source to specify a source IP address for the informs or traps sent
by the SNMP agent.
Use undo snmp-agent { inform | trap } source to restore the default.
Syntax
snmp-agent
interface-number.subnumber }
undo snmp-agent { inform | trap } source
Default
The SNMP agent uses the IP address of the outgoing routed interface as the source IP address of
notifications.
Views
System view
Predefined user roles
network-admin
{ inform | trap } source interface-type
187
{ interface-number |