Enable; Ip Netstream - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Field
In packets
Out bytes
In bytes
First forwarded
Last forwarded
L4 source port
L4 destination port
Sampling algorithm
PAD
Sampling interval
enable
Use enable to enable a NetStream aggregation mode.
Use undo enable to disable a NetStream aggregation mode.
Syntax
enable
undo enable
Default
No NetStream aggregation mode is enabled.
Views
NetStream aggregation mode view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable NetStream destination-prefix aggregation mode.
<Sysname> system-view
[Sysname] ip netstream aggregation destination-prefix
[Sysname-ns-aggregation-dstpre] enable
Related commands
ip netstream aggregation
ip netstream
Use ip netstream to enable NetStream on an interface.
Use undo ip netstream to disable NetStream on an interface.
Description
Number of received packets.
Size of sent packets, in bytes.
Size of received packets, in bytes.
System time when the first packet was forwarded, accurate
to milliseconds.
System time when the last packet was forwarded, accurate
to milliseconds.
TCP/UDP source port number.
TCP/UDP destination port number.
This field is not supported in current release.
Padding string.
This field is not supported in current release.
321
Advertisement
Table of Contents
