Display Logbuffer Summary - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Related commands
info-center logbuffer
reset logbuffer

display logbuffer summary

Use display logbuffer summary to display the summary of the log buffer.
Syntax
In standalone mode:
display logbuffer summary [ level severity | slot slot-number ] *
In IRF mode:
display logbuffer summary [ level severity | chassis chassis-number slot slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
level severity: Specifies a severity level in the range of 0 to 7. If you do not specify this keyword, the
command displays log information of all levels in the log buffer. For more information about log levels,
see Table 82.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information for all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. On an IRF fabric, this command displays
information for all cards if you do not specify a card. (In IRF mode.)
Examples
# (In standalone mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
Slot CPU EMERG ALERT
3 0
7 0
# (In IRF mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
Chassis Slot
2
2
Table 84 Command output
Field
CHASSIS
CRIT ERROR
0 0 0
0 0 3
CPU EMERG ALERT
3 0 0 0
7 0 0 0
Description
IRF member ID of the device in IRF mode.
WARN NOTIF INFO DEBUG
0 1 0
3 2 7
CRIT ERROR WARN NOTIF
0 0 1
3 3 6
363
0 0
3 0
INFO DEBUG
0 0 0
9 12 0