HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 94
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
•
The IP address and port number must be unique on the NQA server and match the
configuration on the NQA client.
•
The IP address must be the address of an interface on the NQA server.
•
To ensure successful NQA operations and avoid affecting existing services, do not configure
the UDP listening service on well-known ports from 1 to 1023.
Examples
# Configure a UDP listening service to enable the NQA server to listen and respond on the IP
address 169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server udp-echo 169.254.10.2 9000
Related commands
display nqa server
nqa server enable
85
Advertisement
Table of Contents
