HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 127
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Usage guidelines
When you specify an NTP server for the device, the device is synchronized to the NTP server, but the
NTP server is not synchronized to the device.
To synchronize the PE to a PE or CE in a VPN, provide vpn-instance vpn-instance-name in your
command.
If you include the vpn-instance vpn-instance-name option in the undo ntp-service unicast-server
command, the command removes the NTP server with the IP address of ip-address in the specified
VPN. If you do not include the vpn-instance vpn-instance-name option in the command, the
command removes the NTP server with the IP address of ip-address in the public network.
Examples
# Specify NTP server 10.1.1.1 for the device, and configure the device to run NTP version 4.
<Sysname> system-view
[Sysname] ntp-service unicast-server 10.1.1.1 version 4
Related commands
ntp-service authentication enable
ntp-service authentication-keyid
ntp-service reliable authentication-keyid
118
Advertisement
Table of Contents
