Snmp-Agent Local-Engineid - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Table 42 Basic security setting requirements for different security models
Security model
Authentication with
privacy
Authentication without
privacy
No authentication, no
privacy
Examples
# Create the SNMPv3 group group1, and assign the no authentication, no privacy security model to
the group.
<Sysname> system-view
[Sysname] snmp-agent group v3 group1
Related commands
display snmp-agent group
snmp-agent mib-view
snmp-agent usm-user

snmp-agent local-engineid

Use snmp-agent local-engineid to change the SNMP engine ID of the local SNMP agent.
Use undo snmp-agent local-engineid to restore the default local SNMP engine ID.
Syntax
snmp-agent local-engineid engineid
undo snmp-agent local-engineid
Default
The local engine ID is the combination of the company ID and the device ID. Device ID varies by
product and might be an IP address, a MAC address, or any user-defined hexadecimal string.
Views
System view
Predefined user roles
network-admin
mdc-admin
Security model
keyword for the
group
privacy
authentication
Neither authentication
nor privacy
182
Security key
settings for the
user
Authentication key,
privacy key
Authentication key
None
Remarks
If the authentication key
or the privacy key is not
configured, SNMP
communication will fail.
If no authentication key is
configured, SNMP
communication will fail.
The privacy key (if any)
for the user does not take
effect.
The authentication and
privacy keys, if
configured, do not take
effect.