HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference page 144

mdc-admin
mdc-operator
Parameters
pse-id: Specifies a PSE by its ID. If you do not specify a PSE, this command displays information
about all PSEs.
Usage guidelines
This command is only available for the default MDC. For more information about MDCs, see Virtual
Technologies Configuration Guide.
Examples
# (In standalone mode.) Display detailed information about PSE 7.
<Sysname> display poe pse 7
PSE ID
Slot No.
PSE Model
PSE Status
Power Priority
Current Power
Average Power
Peak Power
Max Power
Remaining Guaranteed Power
PSE CPLD Version
PSE Software Version
PSE Hardware Version
Legacy PD Detection
Power Utilization Threshold
PD Power Policy
PD Disconnect-Detection Mode
# (In IRF mode.) Display detailed information about PSE 7.
<Sysname> display poe pse 7
PSE ID
Chassis
Slot No.
SSlot No.
PSE Model
PSE Status
Power Priority
Current Power
Average Power
Peak Power
Max Power
Remaining Guaranteed Power
PSE CPLD Version
PSE Software Version
PSE Hardware Version
Legacy PD Detection
Power Utilization Threshold
: 7
: 2
: LSQ1GV48SD0
: Enabled
: Low
: 0.0 W
: 0.0 W
: 0.0 W
: 800.0 W
: 800.0 W
: -
: 390
: 57603
: Disabled
: 80
: Disabled
: DC
: 7
: 1
: 2
: 0
: LSQ1GV48SD0
: Disabled
: Low
: 0.0 W
: 0.0 W
: 0.0 W
: 800.0 W
: 800.0 W
: -
: 390
: 57603
: Disabled
: 80
135