Display Diagnostic Simulation - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

6 4
7 4
8 0
Table 90 Command output
Field
Test name
Port
Packets sent
Packets received
Packets lost

display diagnostic simulation

Use display diagnostic simulation to display configurations for simulated diagnostic tests.
Syntax
In standalone mode:
display diagnostic simulation [ slot slot-number ]
In IRF mode:
display diagnostic simulation [ chassis chassis-number [ slot slot-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
applies to all cards. (In standalone mode.)
chassis chassis-number [ slot slot-number ]: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify an IRF member device or
virtual chassis, the command applies to all member devices. If you do not specify a card, the
command applies to all cards of the specified member device. (In IRF mode.)
Usage guidelines
This command only displays configurations for simulated diagnostic tests. If no simulated diagnostic
test exists, no information is displayed.
Examples
# (In standalone mode.) Display configurations for all simulated diagnostic tests on card 1.
<Sysname> display diagnostic simulation slot 1
Slot 1 :
Name
HGMonitor
4
4
0
Description
Name of the test.
Port number.
Number of packets that the device sends.
Number of packets that the device receives.
Number of lost packets.
Mode
failure
405
0
0
0