Sflow Counter Interval; Sflow Counter Collector - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
Examples
# Configure the following parameters for sFlow collector 2:
•
VPN name—vpn1.
•
IP address—3.3.3.1.
•
Port number—Default.
•
Description—netserver.
•
Aging timer—1200 seconds.
•
Maximum length of the sFlow data portion in the sFlow packet—1000 bytes.
<Sysname> system-view
[Sysname] sflow collector 2 vpn-instance vpn1 ip 3.3.3.1 description netserver time-out
1200 datagram-size 1000
sflow counter interval
Use sflow counter interval to enable counter sampling and set a counter sampling interval.
Use undo sflow counter interval to restore the default.
Syntax
sflow counter interval interval-time
undo sflow counter interval
Default
Counter sampling is disabled.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval-time: Specifies the counter sampling interval in the range of 2 to 86400 seconds.
Examples
# Enable counter sampling and set the counter sampling interval to 120 seconds on GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] sflow counter interval 120
sflow counter collector
Use sflow counter collector to specify an sFlow collector for counter sampling.
Use undo sflow counter collector to restore the default.
Syntax
sflow counter collector collector-id
undo sflow counter collector
354
Advertisement
Table of Contents
