Diagnostic Simulation - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
end-slot-number, by its virtual slot number. The end slot number must be equal to or greater than the
start slot number. (In IRF mode.)
test-name: Specifies a test by its name, a case-insensitive string of 1 to 31 characters.
non-disruptive: Executes all non-disruptive diagnostic tests.
Usage guidelines
You can configure the number of executions and the maximum number of failed tests for on-demand
diagnostic tests at the CLI. When either threshold is reached, the system immediately stops
executing the tests.
Examples
# (In standalone mode.) Stop all non-disruptive diagnostic tests on card 1.
<Sysname> diagnostic ondemand stop slot 1 test non-disruptive
# (In IRF mode.) Stop all non-disruptive diagnostic tests on card 1 of IRF member device 2.
<Sysname> diagnostic ondemand stop chassis 2 slot 1 test non-disruptive
Related commands
diagnostic ondemand failure
diagnostic ondemand repeating
diagnostic simulation
Use diagnostic simulation to simulate diagnostic tests.
Use undo diagnostic simulation to restore the default.
Syntax
In standalone mode:
diagnostic simulation slot slot-number-list test test-name { failure | random-failure | success }
undo diagnostic simulation slot slot-number-list test test-name
In IRF mode:
diagnostic simulation chassis chassis-number slot slot-number-list test test-name { failure |
random-failure | success }
undo diagnostic simulation chassis chassis-number slot slot-number-list test test-name
Default
All diagnostic tests are executed instead of simulated.
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number-list: Specifies a space-separated list of up to seven slot number items. Each item
specifies a card by its slot number or a range of cards in the form of start-slot-number to
end-slot-number. (In standalone mode.)
chassis chassis-number slot slot-number-list: Specifies cards on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The
slot-number-list argument specifies a space-separated list of up to seven slot number items. An item
specifies a card by its slot number, a range of cards in the form of start-slot-number to
397
Advertisement
Table of Contents
