Views
User view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Usage guidelines
In XML view, use NETCONF messages to configure the device or obtain data from the device. The
NETCONF operations you can perform depend on the user roles you have, as shown in
Table 53 NETCONF operations available for the predefined user roles
User role
•
network-admin
•
mdc-admin
•
network-operator
•
mdc-operator
NETCONF messages must comply with the XML format requirements and semantic and syntactic
requirements in the NETCONF XML API reference for the device. To ensure successful configuration,
use third-party software to generate NETCONF messages.
To quit XML view, use a NETCONF message instead of the quit command.
If you have configured a shortcut key (Ctrl + C, by default) by using the escape-key command in
user line/user line class view, the NETCONF message should not contain the shortcut key string.
Otherwise, relevant configurations in XML view might be affected. For example, in user line view, you
configured "a" as the shortcut key by using the escape-key a command. When a NETCONF
message includes the character "a," only the contents after the last "a" in the message can be
processed.
Examples
# Enter XML view.
<Sysname> xml
<?xml version="1.0" encoding="UTF-8"?><hello
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><capabilities><capability>urn:ietf:pa
rams:netconf:base:1.1</capability><capability>urn:ietf:params:netconf:writable-runnin
g</capability><capability>urn:ietf:params:netconf:capability:notification:1.0</capabi
lity><capability>urn:ietf:params:netconf:capability:validate:1.1</capability><capabil
ity>urn:ietf:params:netconf:capability:interleave:1.0</capability><capability>urn:hpe
:params:netconf:capability:hpe-netconf-ext:1.0</capability></capabilities><session-id
>1</session-id></hello>]]>]]>
# Quit XML view.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session>
</close-session>
</rpc>]]>]]>
NETCONF operations
All NETCONF operations
•
Get
•
Get-bulk
•
Get-bulk-config
•
Get-config
•
Get-sessions
•
Close-session
228
Table
53.