Rmon Statistics - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Hide thumbs Also See for FlexNetwork 7500 Series:
Table of Contents

Advertisement

3.
Compares the calculation result with the predefined thresholds, and then takes one of the
following actions:
Triggers the event associated with the rising alarm event if the result is equal to or greater
than the rising threshold.
Triggers the event associated with the falling alarm event if the result is equal to or less than
the falling threshold.
Examples
# Add a permanent private alarm entry to monitor the ratio of incoming broadcasts to the total
number of incoming packets on GigabitEthernet 1/0/1. Log the rising alarm event when the ratio
exceeds 80%, and take no actions when the ratio drops to 5%. The formula is
(1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1), where 1.3.6.1.2.1.16.1.1.1.6.1 is the OID of
the object instance etherStatsBroadcastPkts.1, and 1.3.6.1.2.1.16.1.1.1.5.1 is the OID of the object
instance etherStatsPkts.1.
<Sysname> system-view
[Sysname] rmon event 1 log
[Sysname] rmon event 2 none
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon statistics 1
[Sysname-GigabitEthernet1/0/1] quit
[Sysname] rmon prialarm 1 (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
BroadcastPktsRatioOfGE1/0/1 10 absolute rising-threshold 80 1 falling-threshold 5 2
entrytype forever owner user1
The last number in the OID forms of variables must be the same as the statistics entry index for the
interface. For example, if you execute the rmon statistics 5 command, you must replace
1.3.6.1.2.1.16.1.1.1.6.1
1.3.6.1.2.1.16.1.1.1.5.5, respectively.
Related commands
display rmon prialarm
rmon event

rmon statistics

Use rmon statistics to create an entry in the RMON statistics table.
Use undo rmon statistics to remove an entry from the RMON statistics table.
Syntax
rmon statistics entry-number [ owner text ]
undo rmon statistics entry-number
Default
No entry exists in the RMON statistics table.
Views
Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
entry-number: Specifies a statistics entry index in the range of 1 to 65535.
and
1.3.6.1.2.1.16.1.1.1.5.1
221
with
1.3.6.1.2.1.16.1.1.1.6.5
and

Advertisement

Table of Contents
loading

Table of Contents