Ipv6 Netstream Export V9-Template Refresh-Rate Packet; Ipv6 Netstream Export V9-Template Refresh-Rate Time - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference
Hide thumbs
Also See for FlexNetwork 7500 Series:
- Security configuration manual (597 pages) ,
- Command reference manual (474 pages) ,
- Configuration manual (111 pages)
Table of Contents
Advertisement
ipv6 netstream export v9-template refresh-rate packet
Use ipv6 netstream export v9-template refresh-rate packet to configure the refresh frequency (in
packets) for IPv6 NetStream version 9 templates. The templates are sent after the specified number
of packets are sent.
Use undo ipv6 netstream export v9-template refresh-rate packet to restore the default.
Syntax
ipv6 netstream export v9-template refresh-rate packet packets
undo ipv6 netstream export v9-template refresh-rate packet
Default
Version 9 templates are sent every 20 packets.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
packets: Specifies the number of packets that are sent before version 9 templates are sent to
NetStream servers for an update. The value range is 1 to 600.
Usage guidelines
An IPv6 NetStream server uses version 9 templates to parse the data from the NetStream device,
but the server does not permanently save version 9 templates.
For an IPv6 NetStream server to use correct version 9 templates, configure the refresh frequency or
refresh interval for version 9 templates. If both settings are configured, templates are sent when
either of the conditions is reached.
To configure the refresh interval for version 9 templates, use the ipv6 netstream export
v9-template refresh-rate time command.
Examples
# Configure the device to send IPv6 NetStream version 9 templates every 100 packets.
<Sysname> system-view
[Sysname] ipv6 netstream export v9-template refresh-rate packet 100
Related commands
ipv6 netstream export v9-template refresh-rate time
ipv6 netstream export v9-template refresh-rate time
Use ipv6 netstream export v9-template refresh-rate time to configure the refresh interval for IPv6
NetStream version 9 templates.
Use undo ipv6 netstream export v9-template refresh-rate time to restore the default.
Syntax
ipv6 netstream export v9-template refresh-rate time minutes
undo ipv6 netstream export v9-template refresh-rate time
346
Advertisement
Table of Contents
