Info-Center Loghost - HPE FlexNetwork 7500 Series Network Management And Monitoring Command Reference

Views
System view
Predefined user roles
network-admin
network-operator
Parameters
module-name: Specifies a log source module by its name, a case-insensitive string of 1 to 8
characters. To view the list of available log source modules, use the info-center logging suppress
module ? command.
mnemonic { all | mnemonic-value }: Configures a mnemonic filter for log suppression.
•
all: Suppresses output of all logs of the module.
•
mnemonic-value: Suppresses output of logs with the specified mnemonic value. The
mnemonic-value argument is a case-insensitive string of 1 to 32 characters, which must be the
complete value contained in the mnemonic field of the log message. Log suppression will fail if
a partial mnemonic value is specified.
Usage guidelines
You can configure log suppression rules to filter out the logs that you are not concerned with. A log
suppression rule suppresses output of all logs or only logs with a specific mnemonic value for a
module.
The device supports a maximum of 50 log suppression rules.
Examples
# Configure a log suppression rule to suppress output of logs with the shell_login mnemonic value
for the shell module.
<Sysname> system-view
[Sysname] info-center logging suppress module shell mnemonic shell_login
# Configure a log suppression rule to suppress output of all logs of the NETCONF module.
[Sysname] info-center logging suppress module netconf mnemonic all
# Delete the previously configured log suppression rule that suppresses output of logs with the
shell_login mnemonic value for the shell module.
<Sysname> system-view
[Sysname] undo info-center logging suppress module shell mnemonic shell_login
# Delete the previously configured log suppression rule that suppresses output of all logs of the
NETCONF module.
[Sysname] undo info-center logging suppress module netconf mnemonic all

info-center loghost

Use info-center loghost to specify a log host and to configure output parameters.
Use undo info-center loghost to remove a log host.
Syntax
info-center loghost [ vpn-instance vpn-instance-name ] { hostname | ipv4-address | ipv6
ipv6-address } [ port port-number ] [ facility local-number ]
undo info-center loghost [ vpn-instance vpn-instance-name ] { hostname | ipv4-address | ipv6
ipv6-address }
376