System-Guard Configuration Commands; Display System-Guard - HP 5120 SI series Command Reference Manual

System-guard configuration commands

display system-guard

Syntax
display system-guard [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display system-guard command to display system-guard configuration.
Examples
# Display system-guard configuration.
<Sysname> display system-guard
system-guard detect-threshold:
system-guard aging-time
system-guard rate-limit
queue0
queue4 1500 queue5
Table 46 Output description
Field
system-guard detect-threshold
system-guard aging-time
system-guard rate-limit
:
:
360 queue1 360 queue2
360 queue6
Description
Rate threshold at which system-guard determines a port is under an attack
Aging time for system-guard assigned ACLs and system-guard disabled
ports
Rate limit set for packet queues
300pps
60s
360 queue3 360
360 queue7 360
313