Display Snmp-Agent Group - HP 6125G Command Reference Manual

Table 15 Command output
Field
Community name
Group name
Acl
Storage-type

display snmp-agent group

Syntax
display snmp-agent group [ group-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Specifies an SNMP group name, a case-sensitive string of 1 to 32 characters. You can
specify an SNMPv1, SNMPv2c, or SNMPv3 group.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Displays the community name created by using the snmp-agent
community command or the username created by using the
snmp-agent usm-user { v1 | v2c } command.
SNMP group name:
•
If the community is created by using the snmp-agent community
command, the group name is the same as the community name.
•
If the community is created by using the snmp-agent usm-user { v1
| v2c } command, the name of the group to which the user belongs
is displayed.
Number of the ACL that controls the access of the NMSs in the
community to the device.
Only the NMSs with the IP addresses permitted in the ACL can access
the device with the community name.
Storage type:
•
volatile—Settings are lost when the system reboots.
•
nonVolatile—Settings remain after the system reboots.
•
permanent—Settings remain after the system reboots and can be
modified but not deleted.
•
readOnly—Settings remain after the system reboots and cannot be
modified or deleted.
•
other—Any other storage type.
55